el-GRen-US
X

PRODUCT DESCRIPTION

The "DOUBLE BOILED MIXED OILS"is an advanced product made of drying oils specially fabricated with the double boiling method.

  • Due to its special formula the surfaces which are covered with this product obtain a protective membrane which has a bigger durability than any other similar product.
  • It has exceptional elasticity permitting the contractions as well as the dilatations of the wood without causing any peeling, puffing up or breaking problem.
  • It can be applied on every wooden surface with unrivalled results under the most adversed weather conditions.

RED LEAD PRIMER PREPARATION

FOR WOOD AND METAL SURFACES
DOUBLE BOILED MIXED OILS can be used to prepare high quality RED LEAD PRIMER, with the following formula.

 

DOUBLE BOILED MIXED OILS
55gr
RED LEAD (pigment)
27gr
WHITE SPIRIT
18gr
TOTAL
100gr

 

 


PROCEDURE:

We add READ LEAD to pre-weighted quantity of WHITE SPIRIT and stir to make a homogenous mixture. Then we add DOUBLE BOILED MIXED OILS and stir well.

FOR WOOD SURFACES:

On the properly clean, dry and sand led surface we apply a first coat of DOUBLE BOILED MIXED OILS diluted 50%with W.S. 24 hours later we apply and coat of RED LEAD PRIMER, and a second coat with 24 hours interval.

FOR METAL SURFACES:

In this case we apply 2 coats of RED LEAD PRIMER, with 24 hours overcoating interval.

CAUTION!! Use the above preparation the soonest possible and anyway within 24 hours.

The above data is based upon our scientific knowledge and experience, but depends a lot on the quality of the materials that we do not provide to the consumer (red lead, white spirit) and are valid only if the product and surface preparation and application instructions are strictly followed.

INSTRUCTIONS OF USE

It is applied directly on every wooden surface, yachts, seashore buildings, roofs, window frames and shades, wooden fence rails etc.

The "DOUBLE BOILED MIXED OILS" when applied on walls and floor stones, decorations, earthen casks, gives life to their original colors and brilliance to the surfaces. It may replace TEAK-OIL if diluted by 50% with the solvent DIALYSIS-STAR. For best results at least two coatings are required.

PRODUCT INFORMATION:

Based on modified vegetal oils +648,601,020,025,027.

AFTER USE

Clean brushes and equipment with solvent DIALYSIS-STAR immediately after use.


 

HEALTH AND SAFETY INFORMATION

Flammable. Keep out of reach of children. Use only in well ventilated areas. Do not breathe vapour/spray. In case of contact with eyes, rinse immediately with plenty of and seek medical advice. If swallowed seek medical advice immediately and show this container.

Stir well before use